Richi Court Building

Bangkok

The foundation walls and the roof water tank of this new building in Bangkok were treated with a two coat application of Xypex products. Total area treated was 3,000 m² (32,300 sq. ft.).

Xypex Products

Concentrate

Xypex Concentrate is the most chemically active product within the Xypex Crystalline Waterproofing System. When mixed with water, this light grey powder is applied as a cementitious slurry coat to above ground or below ground concrete, either as a single coat or as the first of a two-coat application.

It is also mixed in Dry-Pac form for sealing strips at construction joints, or for the repairing of cracks, faulty construction joints and honeycombs. Xypex prevents the penetration of water and other liquids from any direction by causing a catalytic reaction that produces a non-soluble crystalline formation within the pores and capillary tracts of concrete and cement-based materials.

Product Data
Play Video

1
a167ae03-659c-461d-9d8b-4ec3bea28f02
Modified

Xypex Modified can be applied as a second coat to reinforce Xypex Concentrate, or applied by itself to dampproof the exterior of foundation walls.

Applied as a second coat, Xypex Modified chemically reinforces Xypex Concentrate where two coats are required and produces a harder finish. Where dampproofing is required, a single coat of Modified may be used as an alternative to a spray/tar emulsion. Xypex prevents the penetration of water and other liquids from any direction by causing a catalytic reaction that produces a non-soluble crystalline formation within the pores and capillary tracts of concrete and cement-based materials.

Product Data
Play Video

2
ac3600b4-94fc-462e-abf6-23ce5ffcbadd
Admix C-1000 NF

Xypex Admix C-1000 NF is added to the concrete mix at the time of batching. Xypex Admix C-1000 NF consists of Portland cement and various active, proprietary chemicals. These active chemicals react with the moisture in fresh concrete and with the by-products of cement hydration to cause a catalytic reaction. This reaction generates a non-soluble crystalline formation throughout the pores and capillary tracts of the concrete that permanently seals the concrete and prevents the penetration of water and other liquids from any direction.

Product Data
Play Video

3
abc28739-c926-4952-ba45-da6e1119334e
Admix C-5000

Xypex Admix C-5000 is a unique chemical treatment that has been specially formulated to enhance the durability of reinforced concrete exposed to aggressive conditions. Xypex Admix C-5000 is added to the concrete mix at the time of batching.

Xypex Admix C-5000 is a powdered additive consisting of Portland cement and various active proprietary chemicals. These active chemicals react with the moisture in fresh concrete and the by-products of cement hydration to cause a catalytic reaction which generates a non-soluble crystalline formation throughout the pores and capillary tracts of the concrete. The reaction products of Xypex Admix C-5000 are in mineral crystal form and prevent the penetration of deleterious ions into ordinary Portland cement concrete, fly ash concrete and slag cement concrete with equal effect. Research work in Australia, Canada and Japan has demonstrated that the Xypex C-Series Admix enhances the ability of concrete to resist sulphate attack, limits chloride ion penetration, improves the chemical resistance of reinforced concrete and accelerates autogenous healing of cracks.

Product Data
Play Video

4
230e1ccb-6c8f-414d-9ce6-f39482bef7d9
Bio-San C500

Xypex Bio-San C500 is a uniquely designed admixture for integral, long-term protection of concrete in harsh sewage conditions with high levels of H₂S that cause microbial induced corrosion. Bio-San C500 combines potent antimicrobial protection along with the unique crystalline technology of the Xypex Admix C-Series.

Product Data
Play Video

5
b2ed80f4-4fe6-6432-ba7c-ff0000137baf
Concentrate DS-1

Xypex Concentrate DS-1 is a special formulation designed specifically for a dry-shake application on horizontal concrete surfaces.

Packaged in the form of a dry powder compound, Concentrate DS-1 consists of Portland cement, various active proprietary chemicals, and an aggregate which has been crushed and graded to particle sizes suitable for concrete floors. DS-1 becomes an integral part of the concrete surface thereby eliminating problems normally associated with coatings (e.g. scaling, dusting, flaking and delamination). The active chemicals react with the moisture of the fresh concrete causing a catalytic reaction which generates a non-soluble crystalline formation within the pores and capillary tracts of the concrete.

Product Data
Play Video

6
a4ed80f4-4fe6-6432-ba7c-ff0000137baf
Patch'n Plug

Xypex Patch'n Plug is a specially designed, fast-setting, non-shrink, high-bond-strength, hydraulic cement compound for concrete patching and repair.

Patch'n Plug stops flowing water in seconds and is used to seal cracks, tie holes, and other defects in concrete. The high performance characteristics of Patch'n Plug are enhanced by Xypex's unique crystalline waterproofing technology.

Product Data
Play Video

7
0da57ed8-5adc-4e52-8c8b-e7bc72879e78
Megamix I & II
Xypex Megamix I is a thin parge coat for the waterproofing and resurfacing of vertical or masonry or concrete surfaces, as a cap coat for Xypex Concentrate, or as an architectural rendering. Megamix I is a unique blend of Portland cement, treated silica sand, fibers and proprietary chemicals. It is mixed with Xycrylic Admix to produce enhanced bond. Megamix I is applied by brush or trowel up to a thickness of 10 mm.

Xypex Megamix II is a high build repair mortar for the patching and resurfacing of deteriorated concrete. Megamix II has been specifically formulated to produce superior bond, low shrinkage, chemical durability and high strength. It is a one component mortar and can be either sprayed or trowel applied at a thickness of 10 mm to 50 mm. The high performance characteristics of Megamix I & II are enhanced by Xypex's unique crystalline waterproofing and protection technology.
Product Data

Megamix I

Megamix II
8
86ee80f4-4fe6-6432-ba7c-ff0000137baf
Megamix II with Bio-San

Xypex Megamix II + Bio-San is a resurfacing mortar specifically designed for the restoration of deteriorated concrete surfaces caused by microbial induced corrosion, abrasion/erosion and chemical attack. It is formulated for ease of application, superior bond, low shrinkage, high strength and resistance to microbial, acid and sulphate attack. Megamix II + Bio-San contains bioactive mineral solids which fix permanently within the repair mortar matrix impairing bio-film formation, thus limiting microbial induced corrosion of the repaired surface in sewer environments. It significantly extends the life of sewer and waste water infrastructure by inhibiting the growth of acid causing sewer bacteria such as Thiobacillus that cause MIC (microbial induced corrosion). In most applications, such as manhole resurfacing, Megamix II + Bio-San can be used to replace epoxy linings and calcium aluminate repair mortars.

Product Data

10
deed80f4-4fe6-6432-ba7c-ff0000137baf
FCM 80

Xypex FCM 80 is specifically designed for repairing cracks subject to movement, sealing construction joints, restoring deteriorated concrete, and waterproofing concrete structures.

FCM 80 has exceptional adhesive and elongation characteristics and is often used in conjunction with the Xypex Crystalline Concrete Waterproofing and Protection System. FCM is a two component product consisting of a specialised liquid polymer dispersion and a cementitious powder. These components are mixed just prior to application.

Product Data

11
6a5e3efe-22f7-4265-ae8f-6aa427e7cde7
Gamma Cure

Xypex Gamma Cure is a curing agent designed specifically for Xypex crystalline waterproofing products. Gamma Cure may be used as an alternative to water curing for certain Xypex applications. It is also used to accelerate the Xypex Crystallization Process.

Product Data

13
4892134f-8546-4dfe-95b3-b3899bf03a43
Xycrylic Admix

Xycrylic Admix is a water-based, high solids, polymer dispersion specifically designed for fortifying Portland cement compositions.

This liquid is milky white in colour and improves curing qualities, enhances bond, imparts excellent water and weather resistance, and reduces shrinkage cracking. Xycrylic Admix is also used to fortify Xypex Patch'n Plug.

Product Data

14
d2a33cc6-5cb0-4d8a-b457-669595fd4f5e
Quickset

Xypex Quickset is a water-soluble liquid blend of silicates, neutralizers and penetrating agents specially compounded to harden, dustproof and seal the surfaces of fresh or newly cured concrete floors.

Applied to the concrete surface, Xypex Quickset penetrates into the capillaries of the concrete substrate and chemically reacts with the free lime and calcium carbonate to form a hard, insoluble gel within the pores, thus closing off the small voids. Quickset provides superior hardening and a dustproof finish.

Product Data

15
ef9eb1ce-8de8-47ac-85de-714d84657b19