Conrad Maldives Kelly Tarltons Underwater World & Spa

Tamaki Drive, Auckland

Xypex Admix C-1000 NF and Kuniseal C-31 waterstop were used to waterproof the new Stingray tank and filter plant room at Kelly Tarlton's. Xypex FCM 40 was also used as an extra measure for the concrete joints. Leaks through the ceiling which constitutes the road above, were plugged using Xypex Patch'n Plug, MPnP Mortar and Concentrate. Photos are provided courtesy of Thorburn Consultants and Kelly Tarlton's.

Xypex Products

Concentrate

Xypex Concentrate is the most chemically active product within the Xypex Crystalline Waterproofing System. When mixed with water, this light grey powder is applied as a cementitious slurry coat to above ground or below ground concrete, either as a single coat or as the first of a two-coat application.

It is also mixed in Dry-Pac form for sealing strips at construction joints, or for the repairing of cracks, faulty construction joints and honeycombs. Xypex prevents the penetration of water and other liquids from any direction by causing a catalytic reaction that produces a non-soluble crystalline formation within the pores and capillary tracts of concrete and cement-based materials.

Product Data
Play Video

1
98de80f4-4fe6-6432-ba7c-ff0000137baf
Admix C-1000 NF

Xypex Admix C-1000 NF is added to the concrete mix at the time of batching. Xypex Admix C-1000 NF consists of Portland cement and various active, proprietary chemicals. These active chemicals react with the moisture in fresh concrete and with the by-products of cement hydration to cause a catalytic reaction. This reaction generates a non-soluble crystalline formation throughout the pores and capillary tracts of the concrete that permanently seals the concrete and prevents the penetration of water and other liquids from any direction.

The Xypex Admix C-Series has been specially formulated to meet varying project and temperature conditions. Xypex Admix C-1000 NF is designed for concrete, where normal to a mild retarded set is desired.

Product Data
Play Video

3
40de80f4-4fe6-6432-ba7c-ff0000137baf
Bio-San C500

Xypex Bio-San C500 is a uniquely designed admixture for integral, long-term protection of concrete in harsh sewage conditions with high levels of H₂S that cause microbial induced corrosion. Bio-San C500 combines potent antimicrobial protection along with the unique crystalline technology of the Xypex Admix C-Series.

Product Data
Play Video

5
afbf80f4-4fe6-6432-ba7c-ff0000137baf
Patch'n Plug

Xypex Patch'n Plug is a specially designed, fast-setting, non-shrink, high-bond-strength, hydraulic cement compound for concrete patching and repair.

Patch'n Plug stops flowing water in seconds and is used to seal cracks, tie holes, and other defects in concrete. The high performance characteristics of Patch'n Plug are enhanced by Xypex's unique crystalline waterproofing technology.

Product Data
Play Video

6
6cde80f4-4fe6-6432-ba7c-ff0000137baf
Megamix I & II

Xypex Megamix I is a thin parge coat for the waterproofing and resurfacing of vertical masonry or concrete surfaces, as a cap coat for Xypex Concentrate, or as an architectural rendering. Xypex Megamix II is a thick repair mortar for the patching and resurfacing of deteriorated concrete. Megamix II has been specifically formulated to produce superior bond, low shrinkage, chemical durability and high strength.

Product Data - Megamix I

Product Data - Megamix II

7
aede80f4-4fe6-6432-ba7c-ff0000137baf
Megamix II with Bio-San

Xypex Megamix II + Bio-San is a resurfacing mortar specifically designed for the restoration of deteriorated concrete surfaces caused by microbial induced corrosion, abrasion/erosion and chemical attack. It is formulated for ease of application, superior bond, low shrinkage, high strength and resistance to microbial, acid and sulphate attack. Megamix II + Bio-San contains bioactive mineral solids which fix permanently within the repair mortar matrix impairing bio-film formation, thus limiting microbial induced corrosion of the repaired surface in sewer environments. It significantly extends the life of sewer and waste water infrastructure by inhibiting the growth of acid causing sewer bacteria such as Thiobacillus that cause MIC (microbial induced corrosion). In most applications, such as manhole resurfacing, Megamix II + Bio-San can be used to replace epoxy linings and calcium aluminate repair mortars.

Product Data

10
d7bf80f4-4fe6-6432-ba7c-ff0000137baf
Xycrylic Admix

Xycrylic Admix is a water-based, high solids, polymer dispersion specifically designed for fortifying Portland cement compositions.

This liquid is milky white in colour and improves curing qualities, enhances bond, imparts excellent water and weather resistance, and reduces shrinkage cracking. Xycrylic Admix is also used to fortify Xypex Patch'n Plug.

Product Data

12
c6de80f4-4fe6-6432-ba7c-ff0000137baf
Restora-Top 50, 100, 200

Xypex Restora-Top products are designed specifically for the repair and rehabilitation of horizontal concrete surfaces such as warehouse floors, bridge decks, roads, curbs, and walkways where the repaired area must be returned to normal service within two hours of the completed repair.

Product Data - Restora-Top 50

Product Data - Restora-Top 100

Product Data - Restora-Top 200

12
8dbf80f4-4fe6-6432-ba7c-ff0000137baf